<dfn class="640picdg4"></dfn>

        <bdo class="640picdg4"></bdo>

        1. <menu class="640picdg4"></menu>
        2. <sup class="640picdg4"></sup>
          <nav class="640picdg4"></nav>

          <strong class="640picdg4"></strong>
        3. Tolerances for radial spherical plain bearings
          Column:Radial SPB Time:2019-10-11

          Tolerances for radial spherical plain bearings 
          1>. Tolerances for radial spherical plain bearings(except for series PB...,GEBJ...S)

          1-1.png

           The deviations in the columns with symbol*apply to spherical plain bearings of series GE…LO.
           Outer ring
          1-2.png
          2>.Tolerances for series PB…
          Inner ring
          1-3.png
          Outer ring
          1-4.png
          3>. Tolerances for series GEBJ...S,
           Inner ring
          1-5.png
          Outer ring
          1-6.png
          The symbols of dimension and tolerance
          d: Bearing bore diameter, nominal.
          △dmp: Single plane mean bore diameter deviation.
          Vdp: Bore diameter variation in a single radial plane.
          Vdmp: mean bore diameter variation.
          △Bs: Deviation of a single width of the inner ring.
          B: Width of inner ring, nominal.
          D: Bearing outside diameter, nominal.
          △Dmp: Single plane mean outside diameter deviation.
          VDp: Outside diameter variation in a single radial plane.
          VDmp: Mean outside diameter variation.
          △Cs: Deviation of a single width of the outer ring.
          C: Width of ourer ring, nominal.
          △Ts: Actual deviation of width of the angular contact spherical plain bearing.
          △Hs: Actual deviation of height of the spherical plain thrust bearing.
          hs,△h1s: Center height deviation of rodends or ball joint rod ends.